รายละเอียด
Inspection of Scaffold Structure - Refresher
Training Course Outline
Course Name: Inspection of Scaffold Structure - Refresher
Training Duration: 1 Day (Including Theory & Practical Training)
Training Time: 08:30 – 16:30
Class Size: Minimum 6 Persons / Maximum 20 Persons.
Certification: Certificate to be issued by 3M Safety Training Center Thailand.
Certification Validity Period: Statement of Attainment valid for 3 years from date of issue.
Training Location: 3M Training Center Thailand /or Onsite Training.
Overview:
This course has been designed to meet or exceed the minimum standard for Scaffolding Inspector to be requested attending the refresher training, as stipulated by Thai Law with the provision of Ministerial of Labor Regulation on the Prescribing of Standard for Administration and Management of Occupational Safety, Health and Environment in Relation to Construction Work B.E. 2564 and referable the minimum requirement of TG-20 (Base on BS 5973 /BS EN 12811-1) Specification.
This course is aimed at delivering students to refresher the theoretical knowledge and practical skills to inspection scaffolding structure and to understand the basic structure and component.
To provide the theoretical knowledge and practical skills required to enable the students to understand and use proper inspection techniques in scaffolding structure.
Target Audience:
Any and all personnel, who are required /or designated by the company take responsibility to inspection in scaffolding structure and who wish to refresher their 3M Certificate or/ Equivalence Certificate.
Student Prerequisites:
- Students should be physically fit and able to participate in moderately strenuous practical activities.
- Students shall be following Drug / Alcohol Policy.
- Students don’t were any short trouser and sandal to Training Center.
- Student shall prepare and were Safety Boots for Training.
Document Prerequisite for Training:
- Copy of ID-Card /or Passport.
- Medical Certificate.
- Existing Training Certificate will be /or was expired.
Learning Objectives:
On completion, students will be able to demonstrate competence in the theory and practice of the following:
- To understand legislative requirement and scaffolding definition/terminology
- To understand the specification of BS 1139 Part 1, BS 1139 Part 2, BS EN39 and BS EN74-1 for Scaffold Tubes & Coupling/Fitting.
- To understand the specification of BS 2482 for Timber Scaffold Board.
- To understand the specification of Scaffold Foundation, Scaffold Ties, Gin Wheels, Ladder and Access Platforms & Egress.
- To understand the basic scaffold structure & component in BS 5973 and BS EN12811-1
- Identify the difference of information between BS 5973 & BS EN12811-1
- Recognize and identify hazards in scaffold.
- To take the appropriate action to prevent or remedy a hazard in the scaffolds listed.
- Apply best practices for inspection on scaffolding structure.
- Apply best practices for writing on SCAFF-TAG System.
Content Covered:
Introduction to Thai Law and TG-20 (Base on BS 5973 / BS EN 12811-1) recommendations:
Definitions
Component of Scaffolding Structure
Scaffold Tubes
Scaffold Coupling/Fitting
Scaffold Board
Specification
Base on BS 5973:1993 and BS EN 12811-1
BS 1139 Part 1 and BS EN39 Specification for tubes used in scaffold structures
BS 1139 Part 2 and BS EN74-1 Specification for Coupling/fitting used on tube connections
BS 2482 Specification for timber scaffolding board
Detail of Scaffolding Components
Scaffolding Tube
Scaffolding Coupling/Fitting
Timber Scaffolding Board
Foundation for Scaffolding Structure
Ties for Scaffolding Structure
Gin Wheels
Ladder and Access Planform & Egress
Access Scaffold and Platform Classification
Independent Tied Scaffolding
Tower Scaffolding
Birdcage Scaffolding
Cantilevered Platform
Slung Scaffolding
SCAFF-TAG System
Marking of Scaffolds
SCAFFTAG Stage #1
SCAFFTAG Stage #2
SCAFFTAG Stage #3
Scaffolding Inspection Check List
2. Practical training and test:
Group Pre-Inspection on scaffolding structure as guide line in inspection check list
Group participation in JSA form completion
3. Individual Hands on Inspection Scaffolding Structure and Evaluations:
JSA form completion
Perform inspection on scaffolding structure
Inspection check list form completion
Evaluation on each employee
Completion of the course
Completion Requirements:
Minimum 70% score on written exam.
Satisfactory completion of practical inspection test.
Note: This cost is included as the following items below, when conduct training at 3M Safety Training Center Thailand:
Basic Personal Protective Equipment (PPE) will be supported during Practical Training such as Safety Helmet, Safety Glasses, Coverall and Gloves.
Meal Provided with Lunch and 2 Coffee breaks per Day.
